Electrode Paste -7

Electrode paste is used in closed electric smelting furnace as continuous self-baking electrode to produce calcium carbide, ferroalloy and so on. During the furnace operation, electrode paste acts as current conductor.

Our electrode paste has following characteristics:
1. Lower ash content;
2. Acurate dosing and stable volatile content;
3. Good electric and thermal conductivity and the sintering speed apropriate to that of consumption of working end;
4. Smelting at lower temperature with certain fluidity and homogeneous composition;
5. High resistance to high temperature, oxidation and thermal shock, low resistivity and high mechanical strength after sintering.

The properties of electrode paste are as follows:
Ash < 6% or 4%
Volatil material 12-15.5%
Compressive strength> 17Mpa or 18Mpa
Electric resistivity <75micro ohm m or 65
Bulk density > 1.38g/cm3
Size: 125*125*60mm or 100*90*60mm

We can offer electrode paste as your special properties demand. At same time, we can also supply tamping paste for furnace building. Our electrode paste export to Thailand, Pakistan, Egypt, Korea, South American, etc.